RockShox Seal and Foam Ring Sets. Fits: 28mm Sid/Judy/Pilot/Dart
RockShox Seal and Foam Ring Sets. Fits: 30mm Duke/Psylo
RockShox Seal and Foam Ring Sets. Fits: 32mm Pike/Recon/Argyle/2005-2008 Reba/Boxxer
$1,099.99 $1,100.00 0% Savings
The Öhlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Öhlins has increased the stanchions to 36mm and upped the spacing to 110mm with an ultra-stiff two-piece alloy crown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy two-piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 46mm offset for party time on the trail. - 150 and 170mm travel options available. - 15x110mm spacing.
$1,149.99 $1,149.99 - $1,150.00 0% Savings
The Ohlins RXF 36 Coil fork uses the same chassis of the RXF 36 fork, keeping the same stiffness, room for bigger tires, and proprietary TTX damping technology, but instead uses high quality coil springs that are easily swapped for various rider weights and it utilizes. This provides a ride with great feel throughout the travel—from small bumps to big hits. - Features a coil spring, with multiple spring rates in 0.9N/mm / 5lb/inch increments, allowing for a plush, linear suspension feel, tuned specific for the riders weight. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and two piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 51mm offset for party time on the trail. - 150 and 160mm travel options available. - 110 x 15mm spacing makes it compatible with most 29-inch setups.
$749.77 - $1,029.99 $1,029.99 Up To 27% Savings
RockShox's Pike RCT3 Solo Air is the ultimate fork for all-mountain and enduro riding. Burly 35mm stanchions, magnesium lowers, and a lightweight hollow forged aluminum crown deliver supreme stiffness to rip down the toughest enduro courses. When the bumps come hard and fast, RockShox's Charger damper keeps the fork high in the travel to maintain proper bike geometry, all while soaking up everything from flowy dirt ribbons to crazy rock-strewn goat paths. The RCT3 three-position switch changes between full travel, lockout and threshold modes so you can save your legs on a transition stage and open it up to pin the next timed downhill.
New Low Friction replacement Dust Wiper/Seal kit. Includes seals and wipers. It is always recommended to replace your Fox Suspension Fluid when replacing seal kits.
$16.99 - $17.49
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
Page 1 of 1