Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Components

Wolf Tooth Components 25mm B-Screw
$1.00
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
PNW Components Rainier 27.2 Dropper Post
$214.99
The Rainier 27.2 dropper post brings riders the convenience and relief of an adjustable height dropper post in a lightweight alloy package. This is the quick fix to those technical and steep descents, giving you infinite height adjustment within its 80mm travel platform. Check out our customer reviews to see how people are enjoying its reliable performance. And best of all, you'll have plenty of cash left over to take the riding crew out for beers after you feel bad for roasting them on the trail. The Rainier not only hits the mark with price, but our simple design makes it easy to service the post and provides consistent performance time after time. Check out our design page for more info.
Continental Gatorskin (700c & 27-inch)
$54.95
Continental's Gatorskin combines 3 flat-protection technologies into one fast-riding, high-mileage racing and training tire. It features a super-fine 180 thread-per-inch casing, a bead-to-bead layer of DuraSkin, and is finished with a Kevlar-reinforced top layer. The result is a light tire that rolls and corners with the best of them while providing flat protection second to none.
Wolf Tooth Components 120 BCD Chainrings
$84.95
120 BCD cranksets were introduced with SRAM 2x10 drivetrains and are excellent candidates for a 1x conversion with our patented Drop-Stop chainrings. These rings will allow you to convert your 120 BCD crankset, like the SRAM XX and others, to a 1x application! - These rings fit any 120 BCD crankset or spider - For SRAM cranksets you must use the stock M8.5 bolts. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings) - For the 36t chainring and non-SRAM cranksets you will need the M8.5 bolts from Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones. - 36t is the smallest number of teeth that fits on a 120 BCD - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 16 Tooth Cog
$14.95
We did our homework on this cog and we think you will be pleased with the result! This 16t cog smooths out the cog to cog transition when using our GC and a standard 10 speed 11-36 cassette. You should expect this to shift well and last as long as the rest of your cassette cogs of similar size. Here are the transitions WITHOUT the 16t cog (4 tooth max jump): - Remove the 15t -> 11-13-17-19.... - Remove the 17t -> 11-13-15-19... Here are the transitions WITH the 16t cog (3 tooth max jump): - Remove 15t & 17t-> 11-13-16-19... Compatibility: Shimano 10 speed cassettes - XT 11-36t (CS-M771) - XTR 11-36t (CS-M980) - Other 11-36t Shimano cassettes like SLX HG81 11-36t - Modification required (must drill out rivets holding the 17t to the larger cogs) SRAM 10 speed cassettes - PG 1030, 1050, and 1070 - 11-36 and 12-36 - X0 11-36t(XG - 1080) - Remove the 14t rather than the 17t
Wolf Tooth Components 64/104 Chainring
$59.95 - $69.95
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components Cyclocross Chainring
$79.95 - $89.95
- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Giant Cog
$79.99 - $90.00
- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy
PNW Components Cascade Dropper Post
$199.99
Building on what PNW learned from their acclaimed Rainier dropper post, the new Cascade model features a lighter post, with a shorter overall length to fit a wider range of bikes. They boosted the travel to 125mm for more clearance when your seat is dropped and the Cascade also features a fixed cable port (versus the basic post head) to tidy up and assist with cable routing.
PNW Components Rainier CX Lever Kit
$39.99
You asked for it, PNW made it. The Rainier CX Lever Kit is designed to mount in the drops of your roadie style handlebars, turning your Cyclocross or Gravel bike into the ultimate rig. Whether getting the saddle out of your way during descents in your local CX race series or providing a little needed relief during a long gravel road ride, PNW now has the answer for you. **We haven't tested this with all cable pull droppers, but it works with most we've tried. Included in the kit: Rainier CX lever with 24mm diameter Cables & Housing. Barrel nut for Rainier post. 45 degree cable noodle for easy routing out of the lever.
PNW Components Rainier Dropper Post
$199.99
Developed in Seattle and designed for maximum shred, the Rainier dropper post is all about reliable performance and plenty of travel to get that saddle out of the way when you're in the steep, techy sections. And best of all, you'll have plenty of cash left over to take the squad out for beers when you feel bad for roasting them on the trail. SIMPLICITY IN DESIGN- The Rainier not only hits the mark with price, but PNW's simple design makes for a easy to service and consistent performance time after time. LIGHTWEIGHT, ALLOY LEFT OR RIGHT LEVER- The slim profile remote lever can be mounted on the right or left side of the handlebar and easily fits between your grip and brake lever for easy access.
Stan's NoTubes 3.30/3.30Ti Hub Kit
$15.00
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm. Works for NS 15mm front hubs too.
Stan's NoTubes 3.30HD 15mm Hub Kit
$20.00
Stan's 3.30HD 15mm Hub Kit makes Stan's 3.30HD front hubs 15mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$79.99 - $80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Specialized Roval 11s XD driver and endcap
$99.99
Where Used:
  • 2019 ENDURO FSR ELITE CARBON 27.5
  • 2019 ENDURO FSR ELITE CARBON 29/6FATTIE
  • 2019 KENEVO FSR COMP 6FATTIE
  • 2019 KENEVO FSR COMP 6FATTIE NB
  • 2019 KENEVO FSR EXPERT 6FATTIE
  • 2019 KENEVO FSR EXPERT 6FATTIE NB
  • 2018 ENDURO FSR ELITE CARBON 27.5
  • 2018 ENDURO FSR ELITE CARBON 29/6FATTIE
  • 2018 KENEVO FSR EXPERT 6FATTIE
  • 2018 KENEVO FSR EXPERT 6FATTIE NB
  • 2018 KENEVO FSR EXPERT TLD 6FATTIE
  • 2018 KENEVO FSR EXPERT TLD 6FATTIE NB
  • 2018 SJ FSR EXPERT CARBON 11M 27.5
  • 2018 SJ FSR EXPERT CARBON 11M 6FATTIE
  • 2017 TRAVERSE 29
  • 2017 TRAVERSE 650b
  • 2016 CAMBER FSR ELITE CARBON 29
  • 2016 CAMBER FSR ELITE CARBON 650B
  • 2016 CAMBER FSR EXPERT CARBON 29
  • 2016 CAMBER FSR EXPERT CARBON 650B
  • 2016 CRUX SINGLE E5
  • 2016 ENDURO FSR EXPERT CARBON 29
  • 2016 ENDURO FSR EXPERT CARBON 650B
  • 2016 EPIC FSR ELITE CARBON WC
  • 2016 EPIC FSR EXPERT CARBON
  • 2016 EPIC FSR EXPERT CARBON WC
  • 2016 RHYME FSR EXPERT CARBON 650B
  • 2016 RHYME FSR EXPERT CARBON 6FATTIE
  • 2016 RUMOR FSR ELITE 29
  • 2016 RUMOR FSR ELITE 650B
  • 2016 RUMOR FSR EXPERT 650B
  • 2016 SJ FSR ELITE 29 I1
  • 2016 SJ FSR ELITE 650B I1
  • 2016 SJ FSR EXPERT CARBON 29 I1
  • 2016 SJ FSR EXPERT CARBON 650B I1
  • 2016 SJ FSR EXPERT CARBON 6FATTIE I1
  • 2016 SJ HT ELITE CARBON WC
  • 2016 TRAVERSE 29
  • 2016 TRAVERSE 650b
  • 2015 Camber FSR Elite Carbon
  • 2015 Camber FSR Expert Carbon EVO
  • 2015 Enduro FSR Elite 29
  • 2015 Enduro FSR Elite 650B
  • 2015 Enduro FSR Expert Carbon 29
  • 2015 Enduro FSR Expert Carbon 650B
  • 2015 Epic FSR Elite Carbon
  • 2015 Epic FSR Elite Carbon WC
  • 2015 Epic FSR Elite M5 WC
  • 2015 Epic FSR Expert Carbon WC
  • 2015 Rumor FSR Elite
  • 2015 Rumor FSR Expert 650b
  • 2015 Rumor FSR Expert EVO
  • 2015 SJ FSR Elite Evo 650b
  • 2015 SJ FSR Expert Carbon Evo 29
  • 2015 SJ FSR Expert Carbon Evo 650B
  • 2015 SJ HT Elite Carbon WC
  • 2015 SJ HT Elite M5 WC
  • 2015 SJ HT Expert Carbon WC
  • 2015 CONTROL 29 142+
  • 2015 TRAVERSE 29
  • 2015 TRAVERSE 650b
SRAM MTH 746 Rear Hub
$87.99 - $109.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
SRAM X9 Rear Hub (12 x 142mm Thru-axle)
$81.49
SRAM's X9 hubs are built tough with light aluminum hubshells for the strength to tackle the mountain year after year. You'll love the durable high-precision cartridge bearings that spin smoothly in all conditions. Plus, careful machining helps keep the X9's weight low without compromising durability.
Evo Blade MTB Quick Release Skewer Set
$19.99
6061-T6 aluminum lever construction Chromoly axle Spacing: 100mm, 135mm Weight: 110g
DT Swiss 240s Road Rear Hub
$339.99
The DT Swiss 240s road hub hits the sweet spot between light weight and reliability. Lace it up and it'll roll for thousands of nearly frictionless miles. The legendary Ratchet System ensures precise engagement and exceptional dependability, no matter how hard you stomp on the pedals.
DT Swiss 350 MTB 6-Bolt Front Hub
$77.99
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these 6-bolt disc hubs will roll for thousands of nearly frictionless miles.
Chris King ISO B Front
$240.99
Chris King ISO B 110x15 front hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub with rail accurate steering, transferring every minute adjustment you make to the trail. To thwart mud, water, and contaminants as you power through rough trails, ISO hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - Optimized flange angle/alignment for improved spoke path, and symmetric wheel build - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Responsibly lightweight
Wolf Tooth Components 102 BCD Chainrings For XTR M960
$79.95
The XTR M960, now 4 generations old in the XTR lineage, is an oldie-but-goodie crankset and Wolf Tooth aims to meet your 1x needs with these rings. Compatibility: - These rings only fit on the M960 crankset in the middle ring position. They are a 102mm BCD. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention)
Wolf Tooth Components 104 Bash Ring
$39.95
- Bash guard protects chainring from logs, rocks and other trail hazards - Designed and manufactured in the USA from 7075-T6 aluminum alloy - See wolftoothcycling.com for mounting tips - 51g (26-30t)
Wolf Tooth Components 104 BCD Chainrings
$59.95 - $64.95
The 104 BCD chainring was Wolf Tooth’s first product ever and it is the most common bolt pattern on double and triple cranksets. Wolf Tooth’s patented Drop-Stop tooth design is the best available anywhere. Compatibility: - These rings fit any 104 BCD crankset - 30 tooth rings require chainring bolts that are 7-10mm long. All other sizes require single ring specific bolts that are ~6mm long. - 30t x 104BCD ring is the only QUARQ power meter compatible 30t ring available! - For 1x9, 1x10, ,1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 104 BCD Stainless Steel Chainrings
$99.95
416 stainless steel is not the first material choice for most component manufactures looking to use stainless steel (most use soft 300 series). That is because 416 is hard...hard because the raw billet is expensive, hard because it takes a long time to machine. However, that did not stop Wolf Tooth because there is no denying that it is the best material for those that need the ultimate durability in a chainring. These stainless steel chainrings are not only beautiful, but they will last 5-10 times longer than their aluminum versions. Compatibility: - These are functionally the same as the aluminum 104 BCD rings. - These rings fit any 104 BCD crankset. - 30t x 104 ring is the only Quarq power meter compatible 30t ring available. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes
Wolf Tooth Components 110 BCD Asymmetric 4-Bolt for Shimano Cranks
$79.95 - $89.95
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 110 BCD Cyclocross and Road Chainrings
$79.95 - $89.95
Wolf Tooth was first to the market with Cyclocross 1x specific chainrings because they saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on road applications with the giant 50t rings! Compatibility: - These rings are for use with 110 BCD 5 arm cranksets. Do NOT fit Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. - Stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 120 BCD Chainrings
$84.95
120 BCD cranksets were introduced with SRAM 2x10 drivetrains and are excellent candidates for a 1x conversion with our patented Drop-Stop chainrings. These rings will allow you to convert your 120 BCD crankset, like the SRAM XX and others, to a 1x application! Compatibility: - These rings fit any 120 BCD crankset or spider. - For SRAM cranksets you must use the stock M8.5 bolts. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings) - For the 36t chainring and non-SRAM cranksets you will need the M8.5 bolts from Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones. - 36t is the smallest number of teeth that fits on a 120 BCD - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 130 BCD Road / Cyclocross Chainrings
$89.95
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, and even full on road applications with the giant 52t rings! - These rings are for use with 130 BCD 5 arm cranksets. - Do NOT fit on Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features fifth bolt with 1X specific shoulder. This kit can be found online. - Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. - 38T important note: The chain may contact the spider arm slightly when using the 38T chainring. Wolf Tooth recommends filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 40T GC Cog for SRAM
$74.95
The GC line of cassette extender cogs allow you to modify your 10 speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassette. Compatibility: - Compatible with SRAM 10 speed cassettes - Compatible with all 10 speed rear derailleurs and chains - Note that you may need a longer chain that you currently have on your bike - Chain stretch should be less than .5 when installing a new GC - Can be run in 2x configuration with a long cage rear derailleur - These fit very tight on certain Stan's No Tubes hubs like the 3.30 and the Easton X4 hubs. With a little filing and some grease they will go on.
Page 1 of 113 Next page